Cisco Nexus 3600 NX-OS, Руководство по настройке безопасности

Страница: 79 / 154

This example shows how to configure the SSH source interface:
switch(config)# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# ip ssh source-interface ethernet 1/7
switch(config)# show ip ssh source-interface
VRF Name Interface
default Ethernet1/7
Starting SSH Sessions to Remote Devices
You can start SSH sessions to connect to remote devices from your Cisco Nexus device.
Procedure
Purpose Command or Action
Creates an SSH session to a remote device. The
hostname argument can be an IPv4 address or a
hostname.
switch# ssh { hostname |
username @ hostname } [ vrf vrf-name ]
Step 1
Clearing SSH Hosts
When you download a file from a server using SCP or SFTP, you establish a trusted SSH relationship with
that server.
Procedure
Purpose Command or Action
Clears the SSH host sessions. switch# clear ssh hosts Step 1
Disabling the SSH Server
By default, the SSH server is enabled on the Cisco Nexus device.
Procedure
Purpose Command or Action
Enters global configuration move. switch# configure terminal Step 1
Enables/disables the SSH server. The default is
enabled. switch(config)# [no] feature ssh Step 2
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
65
Configuring SSH and Telnet
Starting SSH Sessions to Remote Devices