8-5
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Log Codes
Sample log messages:
Searching ..done
04/09/1998-13:57:46 7 clt 6050 Channel in alarm : LCN #21
04/09/1998-15:33:26 7 SuperUser 0 addln 4
04/09/1998-14:29:22 8 talarm 4057 Line Rx LOF alarm on : line: 8
Type <CR> to continue, Q<CR> to stop:
Log Codes
The log codes used in the log messages are broadly classified as shown in Table 8-2.
ASC Log Codes
Table 8-2
Log Code Ranges for Various Cards
Log Code Range
Module Logging Messages
1000–1999
ASC
2000–2999
BNM
3000–3999
Not Used
4000–4999
FRSM
5000–5999
SRM
6000–6999
AUSM
7000–7999
AUSM8/IMATM
8000–8999
CESM
Table 8-3
ASC Log Codes
Error Number
Display Log String
Detail Description
1100
Out of Heap Space
SCM task is running out of heap space, malloc failed.
1101
Sar Operation Failed
Failed to enable, disable, or send data on an LCN.
Additional information describing the specific instance
of failure and the LCN number are displayed.
1102
Switch Over Failed
Not used.
1103
Queue Error
Encountered Data queue overflow error while queuing
data. The particular card index is also displayed.
1104
Unknown number
Error occurred while sending a Frame. Unrecognizable
Frame type.
1105
Seq_num not match
Not used.
1107
Out of xmt buffer
Error occurred due to shortage of transmit buffers in the
SCM. Information describing the specific instance is
also displayed.