Cisco LRE CPE, Руководство по установке оборудования

Страница: 63 / 106

2-25
Cisco LRE CPE Hardware Installation Guide
78-11469-04
Chapter 2 Installation
Connecting to a Telephone
Figure 2-10 Limitations Using a Cisco LRE 48 POTS Splitter with a
Catalyst 2950ST-24 LRE 997 Switch and Cisco 576 LRE CPE
Follow these steps to connect the CPE to a telephone:
Step 1
Connect one end of a telephone cord (not included) to the PHONE port of the
CPE. (See Figure 2-11.)
Caution To reduce the risk of fire, use only number 26 AWG or larger telephone cable.
Caution Always disconnect all telephone lines from the wall outlet before servicing or
disassembling this equipment.
Note
Use a standard telephone cord with RJ-11 connectors on both ends.
Cisco 576 LRE
997 CPE
Cisco LRE 48
POTS splitter
Catalyst 2950ST-24
LRE 997 switch
Traffic from 0 to 700 kHz
89860
POTS Telephone
PC
Traffic from
0 to 120 kHz