Chapter4
Advanced Configuration
23
Wreless-G ADSL Home Gateway
View Log
Log
Type
Select from the following:
ALL
,
System Log
,
Access Log
,
Frewall Log, VPN Log, UPnP Log,
Incomng Log, or Outgong Log
.
Click
Refresh
to update the log. Click
Clear
to clear all
the information that is displayed. Click
Prevous Page
to view the previous page of information. Click
Next
Page
to view the next page of information.
Click
Save Settngs
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Administration > Diagnostics
The ping test allows you to check the connections of your
network devices, including connection to the Internet.
Administration > Diagnostics
Ping Test
Ping Test Parameters
The ping test checks the status of a connection.
Png Target IP
Enter the IP address that you want to
ping. This can be either a local (LAN) or Internet (WAN) IP
address.
Png Sze
Enter the packet size you want to use. The
default is
0
bytes.
Number of Pngs
Enter how many times you want to
ping. The default is
1
.
Png Interval
Enter the number of milliseconds between
pings. The default is
1000
milliseconds.
Png Tmeout
Enter the number of milliseconds before the
ping test will time out. The default is
000
milliseconds.
Start Test
To run the test, click this button. The
Ping Test
screen will show if the test was successful. Click
Close
to
return to the
Diagnostics
screen.
Diagnostics > Ping
Png Result
The results of the ping test are displayed.
Click
Save Settngs
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Administration > Back Up & Restore
The
Back Up & Restore
screen allows you to back up or
restore the Gateway’s settings using a configuration file.
Administration > Back Up & Restore
Back Up Configuration
Back Up
To save the Gateway’s settings in a configuration
file, click
Back Up
and follow the on-screen instructions.
Restore Configuration
To use this option, you must have previously backed up its
configuration settings.
Please select a fle to restore
Click the
Browse
button
and select the Gateway’s configuration file.
