Cisco Linksys RVL200, Руководство пользователя, Страница: 35 / 118

Chapter 4
Advanced Configuration
4-Port SSL/IPSec VPN Router
Rate Control
Servce
Select the Service you want.
If the Service you need is not listed in the menu, click
Servce Management to add the new service. The Service
Management screen appears.
Service Management
Servce Name
Enter a name.
Protocol
Select the protocol it uses.
Port Range
Enter its range.
Click Add to Lst . Click Save Settngs to save your changes,
or click Cancel Changes to undo them. Click Ext to return
to the Bandwidth Management screen.
If you want to modify a service you have created, select it
and click Update ths servce . Make changes. Click Save
Settngs to save your changes, or click Cancel Changes
to undo them. Click Ext to return to the Bandwidth
Management screen.
If you want to delete a service you have created, select it
and click Delete selected servce . Click Save Settngs
to save your changes, or click Cancel Changes to undo
them. Click Ext to return to the Bandwidth Management
screen.
IP Enter the IP address or range you need to control. To
include all internal IP addresses, keep the default, 0 .
Drecton Select Upstream for outbound traffic, or select
Downstream for inbound traffic.
Mn. Rate
Enter the minimum rate for the guaranteed
bandwidth.
Max. Rate
Enter the maximum rate for the maximum
bandwidth.
Enable
Select
Enable
to use this Rate Control rule.
Click
Add to Lst
, and configure as many rules as you
would like, up to a maximum of 100. To delete a rule, select
it and click
Delete selected applcaton
.
Click Summary to see a summary of the Rate Control
rules.
Summary (Rate Control Selected)
To change a rule, click
Edt
. To update the list, click
Refresh
. To return to the Bandwidth Management screen,
click
Close
.
On the Bandwidth Management screen, click
Save Settngs
to save your changes, or click
Cancel Changes
to undo
them.
Priority
QoS > Bandwidth Management > Priority
Servce
Select the Service you want.
If the Service you need is not listed in the menu, click
Servce Management
to add the new service. The Service
Management screen appears.