Cisco LinkSys RTP300 Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 100

Cisco LinkSys RTP300 Скачать руководство пользователя страница 88

Broadband Router with 2 Phone Ports

84

Appendix G: Regulatory Information

The REN is useful to determine the quantity of devices that may be connected to the telephone line and still have all of those devices ring
when your telephone number is called. In most, but not all areas, the sum of RENs should not exceed 5. To be certain of the number of
devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN
for the calling area.

If this equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If advance notice
is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the
equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order
to maintain uninterrupted service.

In the event this equipment should fail to operate properly, disconnect the unit from the telephone line. Try using another FCC approved
device in the same telephone jack. If the trouble persists, call the telephone company repair service bureau. If the trouble does not persist
and appears to be with this unit, disconnect the unit from the telephone line and discontinue use of the unit until it is repaired. Please note
that the telephone company may ask that you disconnect the equipment from the telephone network until the problem has been corrected or
until you are sure that the equipment is not malfunctioning. The user must use the accessories and cables supplied by the manufacturer to
get optimum performance from the product.

No repairs may be done by the customer. If trouble is experienced with this equipment, please contact your authorized support provider for
repair and warranty information. If the trouble is causing harm to the telephone network, the telephone company may request you remove
the equipment from the network until the problem is resolved. This equipment cannot be used on telephone company provided coin service.
Connection to Party Line Service is subject to state tariffs.

«
...
86
87
88
89
90
...
»

Содержание LinkSys RTP300





































































































Отзывы:

Нет отзывов