Cisco LinkSys RTP300 Скачать руководство пользователя страница 30

Страница: 30 / 100

Broadband Router with 2 Phone Ports

Chapter 5: Configuring the Router

The Setup Tab - DDNS

DynDNS.org

User Name, Password, and Host Name

. Enter the User Name, Password, and Host Name of the account

you set up with DynDNS.org.

Internet IP Address

. The Router’s current Internet IP Address is displayed here. Because it is dynamic, this

will change.

Status

. The status of the DDNS service connection is displayed here.

TZO.com

E-mail Address, Password, and Domain Name

. Enter the Email Address, Password, and Domain Name of

the service you set up with TZO.

Internet IP Address

. The Router’s current Internet IP Address is displayed here. Because it is dynamic, this

will change.

Status

. The status of the DDNS service connection is displayed here.

When you have finished making changes to this screen, click the

Update

button to save the changes, or

click the

Cancel Changes

button to undo your changes.

Figure 5-6: Setup Tab - DDNS

(DynDNS.org)

Figure 5-7: Setup Tab - DDNS (TZO.com)

Содержание LinkSys RTP300





































































































Результаты поиска

Содержание LinkSys RTP300

Отзывы:

Cisco LinkSys RTP300, Руководство пользователя, Страница: 30 / 100

Результаты поиска

Содержание LinkSys RTP300

Отзывы: