2
English
Installation
1
NOTE:
Run the Setup CD-ROM to install the Modem Router . If you
cannot run the Setup CD-ROM, refer to this Quick Installation Guide .
Power down all your network devices, including your computer(s)
1.
and the Modem Router . If you currently use a modem, disconnect it
now—the Modem Router replaces your modem .
2.
Connect one end of the
provided Ethernet cable to
your computer’s Ethernet
adapter and the other end to an
Ethernet port on the back of the
Modem Router .
Repeat step 2 for each additional computer or device that you want to
3.
connect to the Modem Router .
NOTE:
If your computer’s Ethernet adapter is not set up, refer to
the Ethernet adapter’s documentation for more information .
4.
Connect one end of the phone
cable to the DSL port on the back .
Connect the other end of the
5.
phone cable to the wall jack
with ADSL service or microfilter .
NOTE:
If you experience static on your phone line, you may need
a microfilter or splitter . (This is required for users in the UK; other
users should contact their ISPs to verify . ISDN users do not need
a microfilter .) If you require a microfilter, you must install one for
each phone or fax that you use . To install a microfilter, plug it into
a phone jack that has ADSL service, then connect one end of the
provided phone cable to the microfilter’s DSL port .
Connect the Computer
Connect the DSL
