6
E
If you already have a router or other
DHCP server automatically
assigning IP addresses, then select
Automatically obtain an IP
address (DHCP)
and click
Next
.
Proceed to Step F.
To set the Network Storage Link’s IP
address and network information,
select
Set IP configuration
manually
and enter the following
information:
• IP Address. Enter the Network
Storage Link’s IP address, and
make sure that it is on the same
local area network (LAN) segment
as the PC running the Setup
Wizard.
• IP Mask. Enter the Subnet Mask,
which must match the subnet
mask of the other devices on your
network. The default is
255.255.255.0
.
• Gateway. This field is left blank by
default. However, if you have a
router on your network, enter its IP
address in this field.
Click the
Next
button.
F
On the
Date/Time Settings
screen,
select your local time zone. Then set
the current date and time. Click
Next
.
G
Review the Network Storage Link’s
settings. If they are correct, click
Save
. If you would like to change
them, click
Back
to return to a
previous screen.
E
F
G
