5. Does E900 support transmission of the log information to a log server?
No.
6. Does E900 lose the settings you have customized when its firmware has been
updated?
Yes. Before upgrading the firmware of your E900, write down all your customized
settings. After upgrading its firmware, you will have to re-enter all of your
configuration settings.
7. What is Radio Band, Standard and Wide?
The
Radio
Band gives you
two (2)
options:
Auto
and
Standard
- 20MHz channel,
Standard channel is what all B/G/N devices use. If you select Wide channel for the
Radio Band setting, then Wireless-N can use two channels: a primary one (Auto) and
a secondary one (Standard Channel). This will improve Wireless-N performance.
8. What is "MAC address clone" and what is it for?
Some Internet Service Providers, especially Cable companies, require you to register
the
MAC Address
of the modem, router or Ethernet adapter of the computer in order
to access the Internet. If you do not wish to re-register the MAC address currently
registered with your ISP, you may assign the MAC address you have currently
registered with your ISP to the router using the
MAC Address Clone
feature.
If you want to clone the MAC address of the computer that you are using to configure
the router, and then click the
Clone My MAC Address
button. The router will
automatically detect your computer’s MAC address, so you do
NOT
have to call your
ISP to change the registered MAC address to the router’s MAC address. It is
recommended that the computer registered with the ISP is used to enable this feature
on the router.
9. What is Diagnostics and what is it for?
Diagnostics
is used to check internet connect and application "ping”, "traceroute”
command to check your network’s connectivity to the Internet.
10. What is Port Forwarding?
