Cisco ITV7900, Руководство пользователя

Страница: 13 / 25

12
Connections for a Standard-Definition TV (SDTV)
When using the receiver with an SDTV, you must make one of the following
connections to view content. Some SDTVs may not have all these connections. Refer
to the owner’s manual for your TV and the cabling diagrams in this manual for more
detailed information.
Although all connections provide you with quality service, we list the connections in our
recommended order.
Notes :
• The labeling on your receiver or SDTV may vary slightly from the illustrations shown below.
• Some cables shown in the connection diagrams may not be included with this receiver.
The YPbPr (red, blue, and green)
connectors can provide standard-definition
component video signals to an SDTV. A
separate audio connection is also needed.
See the connection diagram on
page 18
for an example.
SDTV
Connections
Use One of These Required Connections
to an SDTV
Receiver
Connections
The S-Video connection provides an
optimal video connection to SDTVs. A
separate audio connection is also needed.
See the connection diagram on
page 19
for an example.
Audio/Video
The Video Out connector provides a video
connection to an SDTV. A separate audio
connection is also needed.
See the connection diagram on
page 20
for an example.
S-
Video
To TV (Video Out)
Video Out
TO TV
(VIDEO OUT)
CABLE IN/
ANT IN
S-VIDEO
IN
VIDEO
OUT
VIDEO
IN
L R
L R
Pr
Pb
Y
L R
YPbPr
Audio
Video
Audio
Video
The To TV (Video Out) connector provides
both a video and audio connection to an
SDTV.
See the connection diagram on
page 21
for an example.
Audio
Video
Pr
Pb Y
AUDIO
OUT
L R
AUDIO
OUT
L R
AUDIO
OUT
L R
S-VIDEO
IN
Should these connection pages stay using connectors from the ITV7900?