Cisco ITV7900, Руководство пользователя

Страница: 12 / 25

11
Connections for a High-Definition TV (HDTV)
To use the receiver with an HDTV, you must make one of the following connections to
view the HD content. Refer to the owner’s manual for your TV and the cabling diagrams
in this manual for more detailed connection information.
Although all connections provide you with quality service, we list the connections in our
recommended order.
Notes :
• The labeling on your receiver or HDTV may vary slightly from the illustrations shown below.
• Some cables shown in the connection diagrams may not be included with this receiver.
Some HDTVs have a High-Definition
Multimedia Interface (HDMI) connector. The
HDMI connector provides both a digital video
and audio connection. See the connection
diagram on page 15 for an example.
Note : The HDMI port on the TV must
support high-bandwidth digital content
protection (HDCP).
HDTV
Connections
The HDMI connector can provide the
connection to an HDTV with a DVI input. If
your HDTV has a Digital Visual Interface
(DVI) connector, you need an HDMI-to-DVI
adapter, and a separate audio connection
(either L/R or optical audio).
Note : The DVI port on the TV must support
high-bandwidth digital content protection
(HDCP).
See the connection diagram on
page 16
for an example.
Use One of These Required Connections
to an HDTV
HDMI
HDMI
HDMI
DVI
Receiver
Connections
The YPbPr (red, blue, and green)
connectors provide high-definition
component video signals to an HDTV, and
a separate audio connection (either L/R or
optical audio).
See the connection diagram on
page 17
for an example.
Pr
Pb
Y
Audio/Video
Video
Video
DV
I
HDMI
YPbPr
Pr
Pb Y
Some HDTVs have only RGB or RGB-HV
connectors. If you have one of these
HDTVs, you need a Component-to-RGB
adapter, and you need a separate audio
connection.
B
G
V
H
R
Pr
Pb Y
Adapter Needed
Adapter Needed
Video
RG
B
Audio
L R AUDIO
OUT
L R
AUDIO
OUT
L R
OPTICAL
OPTICAL
INPUT
L R
Audio
AUDIO
OUT
L R
OPTICAL OPTICAL
INPUT
L R
Audio
Should this connection page stay using connectors from the ITV7900?