Cisco ISA500 Series, Руководство администратора

Страница: 300 / 371

Device Management
Configuration Management
Cisco ISA500 Series Integrated Security Appliance Administrator Guide 294
10
Configuration Management
You can perform the following tasks to maintain the configurations:
• Save the current settings used on your security appliance. See Saving your
Current Configurations, page 294 .
• Restore your settings from a saved configuration file. See Restoring your
Settings from a Saved Configuration File, page 295 .
• Revert to the factory default settings. See Reverting to the Factory
Default Settings, page 296 .
Saving your Current Configurations
You can save your current settings as a configuration file on the local PC or on a
USB device if applicable.
NOTE
When saving the configurations to a file, the security license and self-certificates
will not be saved in the file.
STEP 1
Click Device Management -> Firmware and Configuration -> Configuration .
The Configuration window opens.
STEP 2
To save the current settings on your local PC, perform the following steps:
a. In Backup/Restore Settings area, click Backup after the Save A Copy of
Current Settings option. The Encryption window opens.
b. You can optionally encrypt the configurations for security purposes. If you do
not encrypt the configurations, click OK .
c. If you want to encrypt the configurations, check the Encrypt box and enter the
password in the Key field, and then click OK .
d. Locate where to save the configuration file, and then click Save .