Device Management
Administration
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
290
10
-
All IP Addresses:
Any IP address from a remote WAN network can
access the Configuration Utility.
-
Single Address:
Only the specified remote host can access the
Configuration Utility. Enter the IP address of the remote host in the
IP
Address
field.
-
Network Range:
Only the hosts in the specified remote network can
access the Configuration Utility. Enter the starting IP address in the
From
field and the ending IP address in the
To
field.
•
Remote SNMP:
Click
On
to enable SNMP for the remote connection, or click
Off
to disable SNMP. Enabling SNMP allows remote users to use SNMP to
manage the device from WAN side.
STEP 3
Click
Save
to apply your settings.
Administration
Use the Administration page to modify the user name and password of the default
adminstrator account, and configure the user session settings. It includes the
following topics:
•
Changing the User Name and Password for the Default Administrator
Account, page 290
•
Configuring the User Session Settings, page 291
Changing the User Name and Password for the Default
Administrator Account
To prevent unauthorized access, you are forced to immediately change the default
user name and password of the default administrator account at its first login. This
page provides another approach to modify its user name and password, but not
for the first login.
STEP 1
Click
Device Management ->
Administration
.
The Administration window opens.
STEP 2
In the
Administrator name & password
area, enter the following information:
