Cisco IR8140H, Монтажный

Страница: 7 / 18

Figure 5: Mounting Plate Details
Qty. Description Item
4 Carriage bolt holes 1
8 Bracket mount holes 2
2 Clearance holes, 3/4 in. 3
2 Pole clamp notches 4
4 Steel band strap slots 5
Install the Mounting Plate—Poles Up To 4.5 Inches in Diameter
Required Materials
• Mounting plate, carriage bolts, and clamp brackets as described in Pole Mount Kit, on page 2 .
• 13-mm box-end socket wrench
To install the mounting plate on a vertical pole up to 4.5 inches (11.4 cm) in diameter, perform this procedure.
Step 1
Select a mounting location on the pole and place the top and bottom pole clamp bracket (1) notches against the pole.
Step 2 Place one of the clamp brackets on the opposite side of the pole, aligning the clamp bracket holes with the top two carriage
bolt holes on the mounting plate.
Step 3 Insert a carriage bolt (5) through each of the top two carriage bolt holes on the mounting plate and through the holes in
the clamp brackets.
Step 4
Position each bolt in the clamp so that the bolt is next to the pole, as shown in the following figure.
Mounting the Router
7
Mounting the Router
Install the Mounting Plate—Poles Up To 4.5 Inches in Diameter