Cisco IR8140H, Монтажный

Страница: 14 / 18

Step 1 Assemble six sets of bracket hardware (washer, split-lock washer, and bolt), as detailed in Assemble Bracket Hardware,
on page 12 .
Step 2
Place the mounting bracket (6) against the mounting plate by inserting the bracket quick-hang notch (2) over the mounting
plate quick-hang stud (5).
Step 3 Thread the serrated nut onto the quick-mount stud (4) and hand tighten (do not over tighten).
Step 4 Align the pivot grooves (7) on the bracket with four of the bracket-mount holes (1) on the mounting plate. Follow these
guidelines:
• Each of the four pivot grooves on the bracket must be attached to at least one bracket-mount hole on the mounting
plate.
• The final orientation of the mounting plate and router determine which bracket-mount holes are used.
• Mount the router, as described in Install the Mounting Plate On To a Pole, on page 6 .
Step 5 Insert one bolt assembly (3) through one of the pivot grooves (7) on the bracket and then through the corresponding
bracket mount hole on the mounting plate.
Step 6 Repeat Step 5 for the remaining bolt assemblies.
Step 7
Position the mounting-bracket onto the mounting plate, as needed, before further tightening the bolts.
Step 8 Use a socket wrench to evenly tighten all four bolts and the serrated nut to finish installing the bracket on the plate. Use
a torque of 6 to 7 foot-pounds when tightening the bolts and nut.
Attach the Router onto the Mounting Bracket
This section describes how to attach the IR8140H to the mounting bracket.
Required materials:
• 13-mm box-end socket wrench
• Two sets of bracket hardware (split-lock washer, regular washer, and bolt). Attach each of the bracket
sets to opposite sides of the IR8140H to provide support and enable it to rest on the bracket to each side
of the router (see
Figure 10: Assemble Bracket Hardware Set, on page 12 ).
Step 1 Attach two sets of bracket hardware, one on either side of the IR8140H router.
Step 2
Slide the router onto the bracket and rest it on the two quick-hang slots (see Figure 11: Mounting Bracket Details, on
page 12 ).
Step 3 Use a socket wrench to evenly tighten the two sets of bracket hardware to secure the router to the mounting bracket.
Step 4 You are now ready to ground the router. See Grounding the Router, on page 16 .
Mounting the Router
14
Mounting the Router
Attach the Router onto the Mounting Bracket