Chapter 7 - Test Switch Settings
24
Chapter 7 - Test Switch Settings
The switch for Slot 0 controls the entire device. For example, if you set the switch for Slot 0 to
“3” and download new software to the device, all the other interfaces will automatically
receive the software update from Slot 0 via the backplane. In general, the only time you should
use an individual RIOP card’s switch is when the card is unable to communicate with the back-
plane for some reason.
M
Caution:
Settings marked with an asterisk may erase your Flash ROM. Please do not use
these settings without first contacting Compatible Systems Technical Support.
0
Normal Operation
1
Unused*
2
Unused*
3
Run Boot ROM Downloader
4
Unused*
5
Erase Flash ROM (OS and Configuration)
6
Erase Flash ROM (Configuration Only)
7
Unused*
8
Unused*
9
Allow letmein password for 5 minutes after powerup