manualshive.com logo in svg

Cisco HWIC, Руководство по настройке

Поделиться
Скачать
Cisco HWIC Скачать руководство пользователя страница 76

 

4-12

Cisco Wireless ISR and HWIC Access Point Configuration Guide

OL-6415-04

Chapter 4 

  Configure a Local Authenticator

The second section lists stats for each access point (NAS) authorized to use the local authenticator. The 
EAP-FAST statistics in this section include these stats:

  •

Auto provision success—the number of PACs generated automatically

  •

Auto provision failure—the number of PACs not generated because of an invalid handshake packet 
or invalid username or password

  •

PAC refresh—the number of PACs renewed by clients

  •

Invalid PAC received—the number of PACs received that were expired, that the authenticator could 
not decrypt, or that were assigned to a client username not in the authenticator’s database

The third section lists stats for individual users. If a user is blocked and the lockout time is set to infinite, 

blocked

 appears at the end of the stat line for that user. If the lockout time is not infinite, 

Unblocked in 

x seconds

 appears at the end of the stat line for that user.

Use this privileged exec mode command to reset local authenticator statistics to zero:

router# clear radius local-server statistics

 

Using Debug Messages

In privileged exec mode, enter this command to control the display of debug messages for the local 
authenticator:

router# debug radius local-server 

{ 

client

 | 

eapfast 

| 

error 

|

 packets

}

Use the command options to display this debug information:

  •

Use the 

client

 option to display error messages related to failed client authentications.

  •

Use the 

eapfast

 option to display error messages related to EAP-FAST authentication. Use the 

sub-options to select specific debugging information:

  –

encryption

 —displays information on the encryption and decryption of received and 

transmitted packets

  –

events

—displays information on all EAP-FAST events

  –

pac

—displays information on events related to PACs, such as PAC generation and verification

  –

pkts

—displays packets sent to and received from EAP-FAST clients

  •

Use the 

error

 option to display error messages related to the local authenticator.

  •

Use the 

packets

 option to turn on display of the content of RADIUS packets sent and received.

Содержание HWIC





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды