Cisco HWIC, Руководство по настройке

Страница: 118 / 188

7-12
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
Chapter 7 Configuring RADIUS Servers
Configuring and Enabling RADIUS
Beginning in privileged EXEC mode, follow these steps to specify RADIUS authorization for privileged
EXEC access and network services:
To disable authorization, use the no aaa authorization { network | exec } method1 global configuration
command.
Starting RADIUS Accounting
The AAA accounting feature tracks the services that users are accessing and the amount of network
resources that they are consuming. When AAA accounting is enabled, the access point reports user
activity to the RADIUS security server in the form of accounting records. Each accounting record
contains accounting attribute-value (AV) pairs and is stored on the security server. This data can then be
analyzed for network management, client billing, or auditing. See the
“RADIUS Attributes Sent by the
Access Point” section on page 7-18 for a complete list of attributes sent and honored by the access point.
Beginning in privileged EXEC mode, follow these steps to enable RADIUS accounting for each Cisco
IOS privilege level and for network services:
To disable accounting, use the no aaa accounting { network | exec } { start-stop } method1... global
configuration command.
Command Purpose
Step 1 configure terminal Enter global configuration mode.
Step 2 aaa authorization network radius Configure the access point for user RADIUS authorization for all
network-related service requests.
Step 3 aaa authorization exec radius Configure the access point for user RADIUS authorization to determine if
the user has privileged EXEC access.
The exec keyword might return user profile information (such as
autocommand information).
Step 4 end Return to privileged EXEC mode.
Step 5
show running-config Verify your entries.
Step 6
copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Step 1 configure terminal Enter global configuration mode.
Step 2
aaa accounting network start-stop
radius Enable RADIUS accounting for all network-related service requests.
Step 3 ip radius source-interface bvi1 Configure the access point to send its BVI IP address in the
NAS_IP_ADDRESS attribute for accounting records.
Step 4 aaa accounting update periodic minutes Enter an accounting update interval in minutes.
Step 5 end Return to privileged EXEC mode.
Step 6
show running-config Verify your entries.
Step 7 copy running-config startup-config (Optional) Save your entries in the configuration file.