Cisco Firepower 1120, Установка оборудования

Страница: 61 / 98

61
Figure 3 Console Port (Item 1)
Connecting
This section describes how to connect a PC terminal to the console port.
When a terminal is connected to the console port, you can connect directly to the router and configure it. You can connect
a PC terminal to this port while the router is operating normally.
To connect a PC terminal to the router, you must provide:

RJ-45-to-RJ-45 rollover cable

One of the following adapters, depending on the port type of the terminal device: RJ-45-to-DB-25 female DTE
adapter or RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL).
To connect a PC or PC terminal to the console port:
1. Connect one end of the RJ-45-to-RJ-45 rollover cable to the console port on the router.
2. Connect the adapter you provide to the other end of the RJ-45 cable.
3. Connect the adapter end of the cable to the router.
Related Information

For information about starting a terminal session over the console port with Microsoft Windows, Mac OS X, or Linux,
see
Starting a Router Terminal Session, page 93 .

For more information about this port, see Router Hardware Description, page 13 .
Connecting the Serial Port
Before you connect a device to the router serial port ( Figure 4 on page 62 ), you need to know the following:

Type of device, data terminal equipment (DTE) or data communications equipment (DCE)

Type of connector, male or female, required to connect to the device
1 Console port
1
302336