Cisco ESR-PRE2, Руководство по установке обновления

Страница: 6 / 8

6
Cisco Performance Routing Engine (ESR-PRE2) Upgrade Installation
OL-24535-01
Technical Specifications
Technical Specifications
Table 2 lists technical specifications for PRE2.
Table 2 Technical Specifications
Related Documentation
Cisco uBR10012 Universal Broadband Router Performance Routing Engine Module
http://www.cisco.com/en/US/docs/interfaces_modules/cable/performance_routing_engine/installation/
guide/pre5096.html
Cisco uBR10012 Router Release Notes
http://www.cisco.com/en/US/products/hw/cable/ps2209/prod_release_notes_list.html
Regulatory Compliance and Safety Information for the Cisco uBR10012 Universal Broadband Router
http://www.cisco.com/en/US/docs/cable/cmts/ubr10012/regulatory/compliance/ub10rcsi.html
LINK
Green/Off
Carrier detected; passing traffic
No carrier detected; not passing traffic
CRITICAL
MAJOR
MINOR
Off/Yellow
No alarm
Alarm condition
STATUS
Green/Off
PRE2 is ready.
No power to the PRE2, or it is acting as the redundant PRE2
FAIL
Off/Yellow
PRE2 is operating properly
PRE2 disabled by major failure
PCMCIA slot 0 Flash card in Slot 0 is active
PCMCIA slot 1 Flash card in Slot 1 is active
ACO
1
switch Disables the audible alarm
1. Alarm cutoff switch
Table 1 LED and Switch Description (continued)
LEDs/Switch Description
Description Specification
PRE2
PRE2 spare ESR-PRE2/R
ESR-PRE2=
Weight 8.45 lb (3.84 kg)
Power consumption per module 200 Watts
(682.4 btu per hour)