Chapter 1 Enabling DVR Service
4
4011411 Rev B
6
Follow these instructions to enter data in the Set Up Package window:
Package Name:
Enter the package name that your billing system uses to
enable DVR functionality. The name that you enter here must exactly match
the package name that your billing system uses. For example, you might use
the
PVRAC
package to enable DVR functionality.
Note:
If necessary, contact your billing system operator to obtain the correct
package name.
Duration:
Leave the default value of
Unlimited
.
7
Click
Save
to save this package in the DNCS database and close the Set Up
Package window. The package appears in the Package List window.
8
From the Package List window, select the package you will use to authorize DVR
service. From the Package List window, select the package you will use to
authorize DVR service.
9
Click
File
and then select
Open
. The Set Up Package window opens for the
package you selected.
10
Record the number shown in the EID field here: _________________________
Note:
The number shown in the EID field is in hexadecimal format.
11
Click
Cancel
to close the Set Up Package window and return to the Package List
window.
12
Click
File
and then select
Close
to close the Package List window and return to
the DNCS Administrative Console.
13
Refer to the hexadecimal conversion table in
EID Conversion Table
(on page 55)
to convert the EID from hexadecimal format to decimal format, and then write
the decimal format of the EID here: ____________________
14
Go to
Adding a DVR Service to the SAM
(on page 5).
