Frequently Asked Questions
TP-00115
3
0
5
Click the
X
in the upper-right corner of the window to close the Command
Prompt window. You have completed this procedure.
Note:
If you cannot access the Internet, contact your service provider for further
assistance.
Renew ing the IP Address on Macintosh Sy stems
1
Close all open programs.
2
Open your
Preferences
folder.
3
Drag the
tcp/ip preferences
file to the Trash.
4
Close all open windows and empty the Trash.
5
Restart your computer.
6
As your computer starts, simultaneously press and hold down the
Command
(Apple)
,
Option
,
P
, and
R
keys on your keyboard. Keeping those keys pressed
down, power on your Macintosh but do not release these keys until you hear the
Apple chime at least three times, release the keys and let the computer restart.
7
When your computer fully reboots, click the
Apple
icon in the upper-left corner
of the Finder. Scroll down to
Control Panels
, and then click
TCP/IP
.
8
Click
Edit
on the Finder at the top of the screen. Scroll down to the bottom of the
menu, and then click
User Mode
.
9
Click
Advanced
in the User Mode window, and then click
OK
.
10
Click the Up/Down selector arrows located to the right of the Connect Via
section of the TCP/IP window, and then click
Using DHCP Server
.
11
Click
Options
in the TCP/IP window, and then click
Active
in the TCP/IP
Options window.
Note:
In some cases, the
Load only when needed
option does not appear. If it
appears, select the option. A check mark appears in the option.
12
Verify that the
Use 802.3
option located in the upper-right corner of the TCP/IP
window is not selected. If there is a check mark in the option, select the option to
clear the check mark, and then click
Info
in the lower-left corner.
13
Is there a Hardware Address listed in this window?
If
yes
, click
OK
. To close the TCP/IP Control Panel window, click
File
, and
then scroll down to click
Close
.
If
no
, repeat these instructions from Step 6.
14
Reboot your computer.
