Cisco DPC3925 Скачать руководство пользователя | Manualshive

Страница: 5 / 106

background image

4021192 Rev B

5

IMPORTANT SAFETY INSTRUCTIONS

Protect the Product from Lightning

In addition to disconnecting the AC power from the wall outlet, disconnect the signal inputs.

Verify the Power Source from the On/Off Power Light

When the on/off power light is not illuminated, the apparatus may still be connected to the power
source. The light may go out when the apparatus is turned off, regardless of whether it is still plugged
into an AC power source.

Eliminate AC Mains Overloads

WARNING: Avoid electric shock and fire hazard! Do not overload AC mains, outlets,
extension cords, or integral convenience receptacles. For products that require battery
power or other power sources to operate them, refer to the operating instructions for
those products.

Provide Ventilation and Select a Location



Remove all packaging material before applying power to the product.



Do not place this apparatus on a bed, sofa, rug, or similar surface.



Do not place this apparatus on an unstable surface.



Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation
provides proper ventilation.



Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or
other objects on top of this product.



Do not block ventilation openings.

Protect from Exposure to Moisture and Foreign Objects

WARNING: Avoid electric shock and fire hazard! Do not expose this product to
dripping or splashing liquids, rain, or moisture. Objects filled with liquids, such as
vases, should not be placed on this apparatus.

WARNING: Avoid electric shock and fire hazard! Unplug this product before cleaning.
Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning
device (dust remover) to clean this product.

WARNING: Avoid electric shock and fire hazard! Never push objects through the
openings in this product. Foreign objects can cause electrical shorts that can result in
electric shock or fire.

Service Warnings

WARNING: Avoid electric shock! Do not open the cover of this product. Opening or
removing the cover may expose you to dangerous voltages. If you open the cover, your
warranty will be void. This product contains no user-serviceable parts.

«
...
3
4
5
6
7
...
»

Содержание DPC3925











































































































Отзывы:

Нет отзывов

Похожие инструкции для DPC3925

Бренд: ABB Страницы: 44

Бренд: Yes Страницы: 2

Бренд: ICU tech Страницы: 17

Бренд: CloudGate Страницы: 25

Бренд: LOYTEC Страницы: 150

Бренд: WITELCOM Страницы: 2

Бренд: Dusun Страницы: 8

Бренд: XiNCOM Страницы: 56

Бренд: Delta Страницы: 2

Бренд: ZyXEL Communications Страницы: 323

Бренд: Microhard Systems Страницы: 186

Бренд: Garmin Страницы: 8

NetVanta 6330 Series

Бренд: ADTRAN Страницы: 4

Бренд: NKE Страницы: 14

Бренд: Huawei Страницы: 28

NetLink Wireless Telephone

Бренд: SpectraLink Страницы: 30

Бренд: MikroTik Страницы: 22

ThingPark Partner

Бренд: Actility Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды