Configure Wireless Settings
4021194 Rev A
93
Setup Wireless - Access Control Page Description
This section describes the section headings and field descriptions of the Setup
Wireless - Access Control page.
Field Name
Description
Access restriction
When encryption is enabled, this selection allows you to choose one
of the following options from the drop-down list:
Disable (factory default)–No access restrictions based on MAC
address of wireless access devices
Allow–Allows wireless access to only the MAC addresses listed
in the Access List
Deny–Denies wireless access to only the MAC address listed in
the Access List
Closed Network
Allows you to disable or enable the network to access by wireless
clients. When ON is selected, the access point does not broadcast the
SSID. The client device must be configured manually with the SSID
and the MAC address of the access point in order to access with
wireless network.
Access List
Displays the MAC address of the clients that are subject to wireless
access control
Connected Clients
Displays the Host Name, IP Address, and Client ID of wireless clients
that are connected to (associated with) the gateway modem
Function Keys
The following function keys appear on the Setup Wireless - Access Control page.
Key
Description
Apply
Applies and saves the values you enter into the fields without closing
the screen
Clear All
Clears the Access List
Remove
Removes entries from the Access List
Add
Adds a client to the Access List using the MAC address of the client
