Cisco DDR2200 Series, Инструкция по установке и эксплуатации

Страница: 155 / 276

Wireless Basic
4036168 Rev A 133
3 Click Basic . The Wireless Basic screen opens.
4 Check the Enable Wireless check box to enable the wireless network. The screen
populates with additional fields.
5 Do you want to prevent other wireless clients from communicating with the
wireless access point (AP) of the residential gateway?

If yes , check the Hide Access Point check box. This feature prevents any
other wireless client from communicating with the access point of the
residential gateway (or disables the wireless connection).

If no , uncheck the Hide Access Point check box.
6 In the SSID field, enter the Service Set Identifier (SSID).
7 From the Channel drop-down list, select Auto or a channel from 1 to 11.
8 In the Wireless Mode field, select the wireless mode from the drop-down list:

802.11g & 802.11b - Allows you to mix Wireless-B with Wireless-G
equipment, but you will lose the higher performance speeds of Wireless-G.

802.11g only - Features the same benefits as Wireless-B, but offers 5 times the
speed at up to 54 Mbps. Wireless-G currently offers the best combination of
performance and value. You can mix Wireless-B with Wireless-G equipment,
but you will lose the higher performance speeds of Wireless-G.

802.11b only - Operates on the 2.4GHz frequency band and can transmit data
at speeds of up to 11 Mbps within a range of up to 100-150 feet. Wireless
range can be affected by reflective or signal-blocking obstacles, such as
mirrors, walls, devices and location, whether indoors or outdoors.