manualshive.com logo in svg

Cisco CVR100W, Руководство администратора, Страница: 14 / 150

Поделиться
Скачать
Cisco CVR100W Скачать руководство пользователя страница 14

Introduction

Getting to Know the CVR100W

Cisco CVR100W Wireless-N VPN Router Administration Guide

12

1

Back Panel

WAN

The WAN (Internet) port is connected to your Internet device, 
such as a cable or DSL modem.

LAN (1–4)

These ports provide the LAN connection to network devices, 
such as PCs, print servers, or switches.

RESET

The 

RESET

 button has two functions:

•

Reboot: 

If the CVR100W has problems connecting to 

the Internet, press the 

RESET

 button for at least one 

second but no more than five seconds with a paper clip 
or a pencil tip. 

•

Restore to Factory Defaults:

 If you are experiencing 

extreme problems with the CVR100W and have tried all 
other troubleshooting measures, press and hold in the 

RESET

 button for more than five seconds. This reboots 

the unit and restores the factory defaults. The settings 
that you have previously made to the CVR100W are lost.

12VDC

The 12VDC port is where you connect the supplied power 
adapter (12V/0.5 A).

Power

Press this button to power the CVR100W on and off.

Do-Not-Disturb 
Mode Light

•

Solid green when the Do-Not-Disturb Mode button is 
turned on and the CVR100W is operating normally. 

•

Flashes green when the Do-Not-Disturb Mode button is 
turned on, but the Internet connection has problems. 

•

Off when the Do-Not-Disturb Mode button is turned off.

Содержание CVR100W























































































































































Отзывы:

Нет отзывов