6
Next
Continue configuring the CTE from the Administration interface. Perform these steps:
Step 1
From a web browser, enter:
https://ipAddress:9001
Where:
– ipAddress is the IP address of your CTE
– 9001 is the administration port
Step 2
Click the Network tab.
Step 3
Click Yes in the Security Alert dialog box.
Step 4
Log in as root, and enter the root password that you defined in the CTE serial console.
Step 5
On the Interfaces screen of the Network tab, define the Masquerade Host for Interface 0. The
masquerade host is an IP address that can be used for Network Address Translation (NAT).
Step 6
Click Submit to save your changes. Although a Restart Server button appears, you do not need
to restart the server yet.
Step 7
On the Ports screen of the Network tab, select from the Listen on Interface drop-down menu
the IP address that you have configured for Interface 0.
Step 8
Click Submit to save your changes and then click Restart Server.
Step 9
After the server restarts, click the Administration tab.
Step 10
Click Yes in the Security Information dialog box.
Step 11
On the Users screen of the Administration tab, specify a username and password for each
Design Studio user. Enter a username of at least 6 characters and a password of at least 8
characters. Click the Add User button.
From your web browser, check network connectivity by entering
http://ipAddress:httpPort.
For example, if the IP address of your CTE is 192.168.10.0 and its HTTP port is 80, enter
http://192.168.10.0:80.
If the ScreenTop Menu appears, the CTE is properly configured. If the ScreenTop Menu does
not appear, check the settings.
Next
Continue to the next section to install Design Studio.
