Chapter 2 Cabling the CSS
Cabling the CSS 11050 and CSS 11150
2-4
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
CSS 11050 Front Panel Connectors and LEDs
All front panels of the CSS 11050 models contain connectors and LEDs that vary
according to their model number. For example, the CSS 11051 in
Figure 2-3
has:
•
One RS-232 Console connector (9600 baud)
•
One RS-232 Diag connector, reserved for field service use only
(115,200 baud)
•
Eight auto-sensing 10/100-Mbps Fast Ethernet connectors and associated
Link/Activity status, 10/100 (Mbps), and Duplex (Half or Full) LEDs
•
Power, Status, and Ready LEDs
Figure 2-3
CSS 11051 Front Panel Connectors and LEDs
The CSS 11052 (shown in
Figure 2-4
) also has one Gigabit Ethernet connection
using a Gigabit Interface Converter (GBIC), and associated Transmit, Receive,
and Link LEDs. The GBIC complies with Revision 5.1 of the GBIC specification
for Class 4 GBICs. The GBIC network interface complies with the IEEE
1000BASE-SX specification for short laser wavelength of 850 nm and use
SC-type fiber connectors.
Figure 2-4
CSS 11052 Front Panel Connectors and LEDs
49576
Power
Status
Ready
1 2 3 4 5 6 7 8
2X 4X 6X 8X
1X 3X 5X 7X
100BASE-TX
Console
Link/Act
Duplex
10/100
RS-232
Diag
49577
Power
Status
Ready
1 2 3 4 5 6 7 8
2X 4X 6X 8X
1X 3X 5X 7X
100BASE-TX
1000BASE-SX
Console
Link/Act
Duplex
10/100
Link/Sync
Rx
Tx
RS-232
Diag
Gigabit Ethernet port (left - receive, right - transmit) and LEDs