1
Overview
The 6400 is a high-end bullet camera with outdoor-specific features, such as an
IP66-rated housing and concealed wiring to prevent tampering, which makes it the
camera of choice for applications such as parking lots, gas stations, and building
entrances. The Cisco Video Surveillance 6400 IP camera offers resolution with superb
image quality. The 6400 boasts 2-megapixel 1080p HD (1920 x 1080) resolution,
allowing for the delivery of extremely detailed images.
2
Package Contents
The Cisco Video Surveillance IP Camera package includes these items:
•
Cisco Video Surveillance 6400 IP camera (1)
•
Mounting plate alignment sticker (1)
•
Wall mount bracket with mounting plate (1)
•
Waterproof connectors (2)
•
Sun shield(1)
•
Standoff screws (2)
•
Screws (6)
•
Double sided tape (1)
•
Silica gel (1)
•
Pad (1)
•
Cisco pointer card (1)
•
RoHS Document (1)
3
Installing the IP Camera
To install the IP camera, follow these steps:
Procedure
Step 1
Attach the alignment sticker to the wall. Drill three mounting holes and one
larger cabling hole into the wall, hammer the three included wall anchors
into the holes, and secure the mounting plate with included screws.
Step 2
Attach the camera anchor bracket to the side of the IP camera with the two
included screws.
Step 3
(Optional) Connect an external power source or external devices the General
Purpose I/O (GPIO) terminal block.
Step 4
Feed the cable(s) with through the front opening of the wall mount bracket.
Step 5
Push the spring mortise and hook the camera anchor bracket onto the groove of
the wall mount bracket.
Step 6
Secure the two screws on the other side of the wall mount bracket.
Step 7
Hang the wall mount bracket on the mounting plate, and secure the bracket to
the plate using the included screw.
Step 8
(Optional) Install the included waterproof connector to one end of an Ethernet
cable.
Step 9
Connect the RJ45 jack to your network using an Ethernet cable.
Step 10
Adjust the angle of the wall mount bracket to achieve desired IP camera field of
view.
Step 11
(Optional) Install the sun shield.
Step 12
(Optional) If the camera is being install in an area of high humidity, remove the
back cover from the camera, place the included silica gel packet in the camera,
and then replace the back cover onto the camera.
4
Accessing the IP Camera for the First Time
After you install the IP camera, you can access it by using a PC and configure basic
settings. To do so, follow these steps from a PC that is on the same network as the
IP camera and that is running Microsoft Windows 7 (32-bit or 64-bit) or higher:
Procedure
Step 1
Start Internet Explorer 8 (32-bit) or later, enter HTT
PS://
ip_address
in the
Address field, then press
Enter
.
Replace
ip_address
with the IP address that the IP camera obtains through
DHCP in your network. If the camera does not obtain this IP address after
90 seconds, enter
192.168.0.100
.
The Login window appears.
Step 2
Enter the default login credentials:
•
Username:
admin
•
Password:
admin
The Initialization window appears.
Step 3
In the Password and Confirm Password fields in the admin row, enter a
password for the IP camera administrator. Enter the same password in both
fields. The password is case sensitive and can contain up to 8 letters,
numbers, and special characters, but no spaces.
Step 4
In the Password and Conform Password fields in the root row, enter a
password for accessing the IP camera through a SSH connection. Enter the
same password in both fields. The password is case sensitive and can contain
up to 8 letters, numbers, and special characters, but no spaces.
You use this password if you need to troubleshoot the IP camera through an
SSH connection with the assistance of the Cisco Technical Assistance Center.
