Cisco CISCO7206, Быстрый старт

Страница: 25 / 32

25
Replace the I/O Controller
Note Before powering down the router, use the
copy running-config tftp
command to save the router’s running configuration
to a TFTP file server.
1. Power down the router.
2. Disconnect the router from the power source.
3.
Remove any I/O controller cables.
4.
On the I/O controller (1), unscrew the captive installation screws (2).
5. Grasp the handle and pull the I/O controller from the chassis.
6.
Insert the I/O controller and tighten the captive installation screws.
7.
Connect any I/O controller cables.
8.
Connect the router to the power source and power up the router.
9. Retrieve and restore the configuration from the TFTP server and copy it to NVRAM. Use the copy tftp running-config
command to copy the saved configuration from the TFTP file server.
10.
Enter the show running-config command to display the currently running configuration on the terminal. Review the display
and ensure that the configuration information is complete and correct.
11. When you have verified that the currently running configuration is correct, enter the copy running-config startup-config
command to save the retrieved configuration in NVRAM. Otherwise, the new configuration will be lost when you restart
the system.
See the Input/Output Controller Replacement Instructions for complete instructions:
http://www.cisco.com/univercd/cc/td/doc/product/core/7206/fru/3224iofe.htm.
1
I/O controller
2
Captive installation screws
2
ETHERNET-10BFL
EN
RX
0 1
2 3
4
TX RX
TX RX TX
RX TX RX TX
ETHERNET 10BT
ENABLED
0
2
1 3
LINK
0 1
2 3
0
4
1
3
5
6
FAST SERIAL
EN
TD TC RD RC LB CD
TD TC RD RC LB CD TD TC
RD RC LB CD TD TC RD RC
LB CD
ENABLED
MII
LINK RJ45
FAST ETHERNET
0
TOKEN RING
0 1
2
3
ENABLED
IN-RING
4/16 Mbps
Cisco 7200
Series
FAST ETHERNET INPUT/OUTPUT CONTROLLER
ENABLED PCMCIA
EJECT SLOT 0
FE
ENABLEFE LINK
CPU RESET 1O POWER
OK
SLOT 1
FE MII
57015
1 2 2