Figure 5: Alarm Connector
Alarm In Reference
4
NO Alarm Output Normally Open (NO) connection
1
COMMON Alarm Common connection
5
NC Alarm Output Normally Closed (NC) connection
2
Alarm In
3
Console Management Port
You can connect the switch to a PC running Microsoft Windows or to a terminal server through the 5-pole
A-coded console port and configure it by using the CLI. The baud rate and format of the console port is:
• 9600 baud
• 8 data bits
• 1 stop bit
• No parity
• None (flow control)
Figure 6: Console Connector
RXD
4
RTS
1
GND
5
CTS
2
TXD
3
For specified cable, use Cisco Product CAB-CONSOLE-M12=
Note
Cisco Catalyst IE3400 Heavy Duty Series Hardware Installation Guide
5
Product Overview
Console Management Port
