Installing the Fan Tray from the Front Panel of the Chassis
Before you begin
• Read
Guidelines for Removing and Installing a Fan Tray, on page 1
.
• Enable the service mode on the chassis, if you are performing this task in a system that is powered on.
• Ensure that you have the following tools and accessories available:
• Phillips-head screwdriver
• Anti-static mat
Procedure
Step 1
Hold the fan tray assembly with the fans facing to the right.
Step 2
Place the fan tray into the fan tray slot so it rests on the chassis, and then lift the fan tray up slightly, aligning
the top and bottom guides.
Figure 5: Inserting the Fan Tray from the Front of the Chassis
Fan tray without the connector
2
Front side of the fan tray
1
Step 3
Slide the fan tray into the chassis until the two captive installation screws make contact with the chassis.
Step 4
Tighten the two captive installation screws on the front, to secure the fan tray assembly in the chassis.
Installing the Fan Tray
9
Installing the Fan Tray
Installing the Fan Tray from the Front Panel of the Chassis
