Cisco Catalyst 9136 Series Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 84

background image

This Device Meets International Guidelines for Exposure to Radio Waves

The C9136I series device includes a radio transmitter and receiver. It is designed not to exceed the limits for
exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines.
The guidelines were developed by an independent scientific organization (ICNIRP) and include a substantial
safety margin designed to ensure the safety of all persons, regardless of age and health.

As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is
recommended to set the system in a location where the antennas can remain at least a minimum distance as
specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall
exposure of the user or operator.

Separation Distance

20 cm (7.87 inches)

The World Health Organization has stated that present scientific information does not indicate the need for
any special precautions for the use of wireless devices. They recommend that if you are interested in further
reducing your exposure then you can easily do so by reorienting antennas away from the user or placing he
antennas at a greater separation distance then recommended.

This Device Meets FCC Guidelines for Exposure to Radio Waves

The C9136I series device includes a radio transmitter and receiver. It is designed not to exceed the limits for
exposure to radio waves (radio frequency electromagnetic fields) as referenced in FCC Part 1.1310. The
guidelines are based on IEEE ANSI C 95.1 (92) and include a substantial safety margin designed to ensure
the safety of all persons, regardless of age and health.

As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is
recommended to set the system in a location where the antennas can remain at least a minimum distance as
specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall
exposure of the user or operator.

The device has been tested and found compliant with the applicable regulations as part of the radio certification
process.

Separation Distance

27 cm (10.62 inches)

The US Food and Drug Administration has stated that present scientific information does not indicate the
need for any special precautions for the use of wireless devices. The FCC recommends that if you are interested
in further reducing your exposure then you can easily do so by reorienting antennas away from the user or
placing the antennas at a greater separation distance then recommended or lowering the transmitter power
output.

This Device Meets the Industry Canada Guidelines for Exposure to Radio
Waves

The C9136I series device includes a radio transmitter and receiver. It is designed not to exceed the limits for
exposure to radio waves (radio frequency electromagnetic fields) as referenced in Health Canada Safety Code

Cisco Catalyst 9136I Series Access Point Hardware Installation Guide

39

Declarations of Conformity and Regulatory Information

This Device Meets International Guidelines for Exposure to Radio Waves

«
...
45
46
47
48
49
...
»

Содержание Catalyst 9136 Series





















































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 9136 Series

Бренд: UNICOM Страницы: 1

Бренд: Tenda Страницы: 57

TL-WR741ND - Wireless Lite N Router

Бренд: TP-Link Страницы: 13

Бренд: Cricket Страницы: 32

MetroLinq2.5 ML2.5-60-35

Бренд: IgniteNet Страницы: 9

Бренд: Ebyte Страницы: 27

UniFi AP BeaconHD

Бренд: Ubiquiti Страницы: 11

Бренд: Lancom Страницы: 9

Бренд: Ubiquiti Страницы: 32

Бренд: cramZ Страницы: 20

Бренд: Linksys Страницы: 121

Бренд: Wunda Страницы: 2

Бренд: Trust Страницы: 14

Бренд: Trust Страницы: 21

Бренд: HPE Страницы: 4

Бренд: LG Innotek Страницы: 12

WatchDog 3388BC

Бренд: Spectrum Technologies Страницы: 10

Бренд: Linksys Страницы: 720

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды