Cisco Catalyst 5000 Series Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 33

background image

Configuring Token Ring LAN Emulation

Last Updated: December 4, 2012

This chapter describes how to configure Token Ring LAN emulation (LANE) on the Catalyst 5000
platform. This feature is supported on the following Catalyst 5000 series ATM modules:

•

ATM Dual PHY OC-12 modules (WS-X5161 and WS-X5162)

•

ATM Dual OC-3 modules (WS-5167 and WS-X5168)

Support for the Token Ring LANE feature was first introduced in Cisco IOS Release 12.0(7)T.

Note

Beginning with Cisco IOS Release 11.3, all commands supported on the Cisco 7500 series routers are also
supported on the Cisco 7000 series.

For a complete description of the commands in this chapter, refer to the the Cisco IOS Switching Services
Command Reference. To locate documentation of other commands that appear in this chapter, use the
command reference master index or search online.

•

Finding Feature Information, page 1

•

Token Ring LANE on ATM, page 2

•

Network Support, page 3

•

Restrictions, page 4

•

Prerequisites, page 5

•

Token Ring LANE Configuration Task List, page 6

•

Token Ring LANE Configuration Example, page 28

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats
and feature information, see

Bug Search Tool

and the release notes for your platform and software release.

To find information about the features documented in this module, and to see a list of the releases in which
each feature is supported, see the feature information table at the end of this module.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to

www.cisco.com/go/cfn

. An account on Cisco.com is not required.

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

1
2
3
...
»

Содержание Catalyst 5000 Series


































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 5000 Series

Minas A4 Series

Бренд: Panasonic Страницы: 5

Бренд: Gardena Страницы: 17

Бренд: SAFI Страницы: 18

Бренд: Badger Meter Страницы: 2

Бренд: Badger Meter Страницы: 48

BadgerTouch HREBT

Бренд: Badger Meter Страницы: 12

Бренд: Badger Meter Страницы: 16

Бренд: Bartec Страницы: 26

Бренд: V2 Страницы: 48

C-NaviGator III

Бренд: C-Nav Страницы: 20

Бренд: Daikin Страницы: 48

Бренд: Daikin Страницы: 77

Бренд: Daikin Страницы: 32

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 14

Бренд: Daikin Страницы: 16

Бренд: Daikin Страницы: 1

Бренд: Eaton Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды