Cisco Catalyst 3000, Руководство администратора

Страница: 414 / 496

Table 97: Tasks on the User Preferences page
Then do this after you sign in... If you want to...
1
Check the
Reach me on Cisco Mobile Client at
check box.
2 Perform one of the following tasks:
• Enter a phone number (your mobile phone number)
that includes an access code, area code and so on. (For
example, enter the phone number as if you were
placing a call from your desk phone.)
• Select a phone number from the drop-down list box,
if a phone number is displayed. (These phone numbers
are the last five numbers that you entered for this
setting.)
A maximum of five phone numbers is displayed in the list.
The newest number that you entered is displayed at the top
of the list; the oldest number is displayed at the bottom.
To edit a phone number in the list press backspace on your
keyboard. If you edit a phone number, the original number
continues to be displayed in the list.
To remove all the phone numbers from the list, click
Clear History
. Then, click
OK
in the dialog box
that appears.
Tip
3 Select the user phone type from a list of mobile phones that
support Cisco mobile clients.
4
A unique device ID for each user is returned after you select
the phone type.
The first part of the device ID is not unique and is
related to the phone type that you selected.
Note
5 Click Save .
Set Reach me on Cisco Mobile Client
The system administrator must
enable Cisco Mobile Client
Support for this setting to be
shown.
Note
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
394 OL-27022-01