Cisco Catalyst 2960 Series Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 108

background image

2-4

Catalyst 2960 Switch Hardware Installation Guide

OL-7075-09

Chapter 2 Switch Installation (24- and 48-Port Switches)

Preparing for Installation

Warning

When installing or replacing the unit, the ground connection must always be made first and
disconnected last.

Statement 1046

Warning

Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if
interconnections are made using uninsulated exposed metal contacts, conductors, or terminals.
Avoid using such interconnection methods, unless the exposed metal parts are located within a
restricted access location and users and service people who are authorized within the restricted
access location are made aware of the hazard. A restricted access area can be accessed only through
the use of a special tool, lock and key or other means of security.

Statement 1072

Warning

No user-serviceable parts inside. Do not open.

Statement 1073

Warning

Installation of the equipment must comply with local and national electrical codes.

Statement 1074

Guidelines for Particulate Matter

Cisco Ethernet switches are equipped with cooling mechanisms, such as fans and blowers. However,
these fans and blowers can draw dust and other particles, causing contaminant buildup inside the chassis,
which can result in a system malfunction.

You must install this equipment in an environment as free as possible from dust and foreign conductive
material (such as metal flakes from construction activities).

These standards provide guidelines for acceptable working environments and acceptable levels of
suspended particulate matter:

•

Network Equipment Building Systems (NEBS) GR-63-CORE

•

National Electrical Manufacturers Association (NEMA) Type 1

•

International Electrotechnical Commission (IEC) IP-20

This precaution applies to all Catalyst 2960 switches except for the Catalyst 2960-8TC-L, 2960-8TC-S,
2960G-8TC-L, and 2960PD-8TT-L switches.

Installation Guidelines

This section does not apply to the Catalyst 2960 8-port switches. For information applicable to those
switches, see

Chapter 3, “Switch Installation (8-Port Switches).”

When you determine where to place the switch, be sure to observe these requirements:

•

For 10/100/1000 ports, cable lengths from the switch to connected devices must be no longer than
328 feet (100 meters).

•

The cables meet the specifications in

Table B-1 on page B-5

, which lists the cable specifications for

1000BASE-X and 100BASE-X SFP modules for the Catalyst 2960 switch. Catalyst 2960 switch
SFP ports can use both GLC-GE-100XX and GLC-FE-100XX SFP modules.

«
...
34
35
36
37
38
...
»

Содержание Catalyst 2960 Series













































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 2960 Series

ShareCenter DNS-320L

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 11

Бренд: D-Link Страницы: 8

AirPlus DWL-810

Бренд: D-Link Страницы: 8

Бренд: D-Link Страницы: 84

QSR-3920 Series

Бренд: QTech Страницы: 120

Бренд: Quantum Страницы: 20

Бренд: Vanguard Страницы: 4

S5120V3-EI Series

Бренд: H3C Страницы: 54

Бренд: H3C Страницы: 116

Бренд: Lindy Страницы: 4

WGR614 - Wireless-G Router Wireless

Бренд: NETGEAR Страницы: 116

Бренд: Conel Страницы: 32

SW-UNM-24FE2GC-24POE

Бренд: Morrell Страницы: 8

Бренд: Accton Technology Страницы: 78

Wisenet XRN-6410RB2-24TB

Бренд: Hanwha Techwin Страницы: 124

Бренд: TP-Link Страницы: 113

Бренд: VIA Technologies Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды