Figure 1: Removing the Inner Rail From the Assembly
Inner rail release clip
2
Rail release latch
1
Step 2
Attach the inner rails to the sides of the server:
The inner rails are not identical: there is a left rail and a right rail (as viewed from the chassis front). The inner
rails are marked with “L” for left or “R” for right.
Note
a) Align the left inner rail marked “L” with the left side of the chassis (as viewed from the front). Align the 10 keyed
slots in the rail with the 10 pegs on the side of the chassis.
b) Set the keyed slots over the pegs, and then slide the rail toward the front to lock it in place on the pegs.
c) Install the right inner rail marked “R” to the right side of the chassis (as viewed from the front).
Installing the Server
5
Installing the Server
Installing the Server in a Rack
