Cisco C3230-1W-49-K9 - 3230 WMIC Card Bundle Router Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 94

background image

viii

Cisco 3200 Series Router Hardware Reference

OL-5816-10

Audience and Scope

The audience for this document is the system administrator (SA), the SI, and the system engineer (SE).
They are experts with networking industry training and experience. We assume that users are familiar
with the terminology and concepts of the PC-104, Cisco IOS software, and Mobile IP networking.

The SA, SI, or SE refers to this document to understand how the router hardware is connected to
peripheral devices and to perform minor troubleshooting on the cards in an existing router. Although
they might not be specifically identified as SAs, SIs, or SEs, all users of this documentation are assumed
to have comparable skills and knowledge.

Related Documentation

You can access these documents on the Documentation page on Cisco Connection Online (CCO) at
www.cisco.com. The following documentation is available at the

http://www.cisco.com/en/US/products/hw/routers/ps272/tsd_products_support_series_home.html

:

•

Release Notes for the Cisco 3200 Series Mobile Access Routers

(78-13975)—Provides information

about accessing documentation and technical assistance for the Cisco 3200 Series router.

•

Radio Channels and Transmit Frequencies

(OL-11491-03)—Description of how to determine the

radio type and how to configure radio channel spacing, radio channel or frequency, and Dynamic
Frequency Selection (DFS).

•

Roles and the Associations of Wireless Devices

(OL-11494-03)—Description of the roles Cisco

wireless devices can be assigned and how the role of a device affects its ability to associate or not
associate with other wireless devices.

•

Cisco 3200 Series Wireless MIC Software Configuration Guide

(OL-6415-05)—Provides sample

procedures for using the IOS commands to configure Wireless Mobile Interface Cards (WMICs).

•

Cisco 3200 Series Mobile Access Router Software Configuration Guide

(OL-1926-06)—Provides

sample procedures for using the Cisco IOS commands to configure the Cisco 3270 Rugged Router
card or the Mobile Access Router Card (MARC) in Cisco 3200 Series routers.

•

Cisco 3200 Series Mobile Access Router Hardware Reference

(OL-5816)—(This book) Provides

descriptions of the Cisco MIC I/O cards in the Cisco 3200 Series routers.

•

Cisco 3200 Series Mobile Access Router Reference Sell Document

(OL-3880)—Presents an

overview of the reference sell program and components for the Cisco 3200 Series router.

•

Regulatory Compliance and Safety Information for the Cisco 3200 Mobile Access Router

(78-16930)—Provides regulatory compliance and safety information.

The release notes that list the enhancements to and caveats for Cisco IOS releases that pertain to the
Cisco 3200 Series router are available at:

http://www.cisco.com/en/US/products/sw/iosswrel/products_ios_cisco_ios_software_releases.html

or

http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/ps4629/index.html

For information about using Cisco IOS software to configure SNMP, see to the following documents:

•

The “Configuring SNMP Support” chapter of the

Cisco IOS Configuration Fundamentals

Configuration Guide,

Release 12.2

•

The “SNMP Commands” chapter of the

Cisco IOS Configuration Fundamentals Command

Reference,

Release 12.2

«
...
6
7
8
9
10
...
»

Содержание C3230-1W-49-K9 - 3230 WMIC Card Bundle Router































































































Отзывы:

Нет отзывов

Похожие инструкции для C3230-1W-49-K9 - 3230 WMIC Card Bundle Router

Бренд: Observint Страницы: 117

BroadLink SP3353

Бренд: MicroNet Страницы: 66

PG-FlexPlus AMU-912

Бренд: ADC Страницы: 130

totalstorage 200

Бренд: IBM Страницы: 180

IPAM-1600s Series

Бренд: C-Com Страницы: 148

UniFi Cloud Key

Бренд: Ubiquiti Страницы: 13

Бренд: Belkin Страницы: 2

Бренд: Idis Страницы: 22

Бренд: BinTec Страницы: 34

Бренд: Juniper Страницы: 420

Бренд: ZyXEL Communications Страницы: 348

Бренд: Net Optics Страницы: 2

Бренд: Goonas Страницы: 13

Бренд: VERTO Страницы: 48

Бренд: ACTi Страницы: 12

Бренд: Gemtek Страницы: 29

Бренд: Ubiquiti Страницы: 13

WRT330N - Wireless-N Gigabit Gaming Router Wireless

Бренд: Linksys Страницы: 92

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды