Figure 37: Inner Rail Release Clip
Inner rail attached to chassis and inserted into outer
rail
2
Inner rail release clip
1
Outer rail attached to rack post
3
Step 5
(Optional) Secure the chassis in the rack more permanently by using the two screws that are provided with the slide rails.
Perform this step if you plan to move the rack with chassis installed. With the chassis fully pushed into the slide rails,
open a hinged slam latch lever on the front of the chassis and insert the screw through the hole that is under the lever.
The screw threads into the static part of the rail on the rack post and prevents the chassis from being pulled out. Repeat
for the opposite slam latch.
What to do next
Install the cables according to your default software configuration as described in the
for your software version.
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
36
Rack-Mount the Chassis
Rack-Mount the Chassis
