3
Cisco 10000 ESR AC Power Entry Module Installation
78-10832-01
Prerequisites and Preparation
Prerequisites and Preparation
Before you perform any of the procedures in this guide, Cisco recommends that
you:
•
Read the safety guidelines in the next section and review the electrical safety
and ESD-prevention guidelines in the
Cisco 10000 ESR Hardware
Installation Guide
.
•
Ensure that you have all of the necessary tools and equipment before
beginning the installation (see the “Installation Guidelines” section on
page 4).
•
Have access to the following documents (shipped with your Cisco 10000
system) during the installation:
–
Cisco 10000 ESR System Description
–
Cisco 10000 ESR Hardware Installation Guide
–
Cisco 10000 ESR Troubleshooting Guide
–
Cisco 10000 ESR Software Configuration Guide
Safety Guidelines
Before you begin the installation or replacement procedure, review the safety
guidelines in this section to avoid injuring yourself or damaging the equipment.
Before you install, configure, or perform maintenance on the router, you should
also review the safety warnings listed in the
Cisco 10000 ESR Hardware
Installation Guide
.
Safety Warnings
Safety warnings appear throughout this publication in procedures that, if
performed incorrectly, may harm you. A warning symbol precedes each warning
statement. The following warning is an example of a safety warning. It identifies
the warning symbol and associates it with a bodily injury hazard.
