manualshive.com logo in svg

Cisco BEKEM, Руководство пользователя

Поделиться
Скачать
Cisco BEKEM Скачать руководство пользователя страница 4

• The fast-charging feature on the back USB does not work when more than one key expansion module

is attached to a Cisco IP Phone 8861 using 802.3at PoE.

• The fast-charging feature on the back USB doesn’t work when more than one key expansion module is

attached to a Cisco IP Phone 8861, unless Cisco Universal PoE (UPoE) is used.

• Cisco IP Phone 8851 with 2 key expansion modules works on 802.3at PoE only with v08 or later hardware.

You can find the phone version information on the lower back of the phone as part of the TAN and PID
label. Version information is also located on the individual phone packaging.

Note

Table 4: Power-Supply Compatibility for Cisco IP Phone 8851/8861 Key Expansion Module and Cisco IP Phone 8865 Key Expansion Module

Cisco IP Phone Power Cube 4

802.3at PoE

802.3af Power over Ethernet
(PoE)

Configuration

Yes

Yes

Yes

8851 with 1 key expansion
module

Yes

Yes

See the third note below

No

8851with 2 key expansion
modules

Yes

Yes

No

8861 and 8865 with 1 key
expansion module

Yes

Yes

See the first note below

No

8861 and 8865 with 2 key
expansion modules

Yes

Yes

See the first note below

No

8861 and 8865 with 3 key
expansion modules

• The fast-charging feature on the back USB does not work when more than one key expansion module

is attached to a Cisco IP Phone 8861 and 8865 using 802.3at PoE.

• The fast-charging feature on the back USB doesn’t work when more than one key expansion module is

attached to a Cisco IP Phone 8861 and 8865, unless Cisco Universal PoE (UPoE) is used.

• Cisco IP Phone 8851 with 2 key expansion modules works on 802.3at PoE only with v08 or later hardware.

You can find the phone version information on the lower back of the phone as part of the TAN and PID
label. Version information is also located on the individual phone packaging.

Note

Connect a Key Expansion Module to a Cisco IP Phone

If you want to install more than one key expansion module, you repeat steps 7-9 to connect the other key
expansion modules together.

Cisco IP Phone Key Expansion Module

4

Cisco IP Phone Key Expansion Module

Connect a Key Expansion Module to a Cisco IP Phone

Содержание BEKEM

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды