Cisco BEKEM Скачать руководство пользователя страница 11

Страница: 11 / 16

Step 10

Use a screwdriver to fasten the screws into the phone and into each key expansion module.

This step ensures that the phone and key expansion modules remain connected at all times. This diagram
shows the location of the screw holes.

Make sure that the screws are fully inserted into the phone and tightened.

Note

Step 11

(Optional) Install the footstands on the phone and on the key expansion modules, and adjust all footstands to
rest evenly on the work surface.

Step 12

Plug the Ethernet cable into the phone.

Auto Detection of Key Expansion Modules

You can configure a new phone to auto-detect the maximum number of key expansion modules that it supports.
For these phones, the

Number of Units

field shows the maximum number of key expansion modules that the

phone supports as the default value. When a user adds key expansion modules to these phones, the module
lights up and is enabled automatically. Default value of this field is 2 for Cisco IP Phone 8851 and 3 for Cisco
IP Phone 8861. Navigate to

Admin Login

Advanced

Voice

Att Console

to check the value of the

Number of Units

field.

Cisco IP Phone Key Expansion Module

Auto Detection of Key Expansion Modules

Содержание BEKEM

















Результаты поиска

Содержание BEKEM

Отзывы:

Бренды по названию

Популярные бренды

Cisco BEKEM, Руководство пользователя

Результаты поиска

Содержание BEKEM

Отзывы:

Бренды по названию

Популярные бренды