3-12
Cisco AVS 3120 Application Velocity System Hardware Installation Guide
OL-11805-01
Chapter 3 Installing the AVS 3120
Setting the Time
Step 8
We also recommend that you change the account password from its default. To do this, use the
edit admin
command:
velocity>
edit admin current-name fgn new-password
password
where:
password
is the new password for the
fgn
account.
For more details about using the CLI and the Management Console, refer to the
Cisco Application
Velocity System User Guide.
Setting the Time
Many features of AVS depend on having the clocks synchronized among all of the deployed AVS devices
and the origin servers. It is important to synchronize all clocks whenever a new device is deployed.
Here is a summary of the ways to set the clock on an AVS device:
•
Use the
set date
command to set the date, time, and local time zone.
•
Use the
set ntp
command to configure the AVS device to get its time from an NTP time
synchronization source. The NTP source should be the same for all deployed AVS devices and origin
servers.
Note
We recommend that you use an NTP time synchronization source.
For information on using the CLI to configure the AVS 3120, refer to the
Cisco Application Velocity
System User Guide
. For an example of using the
set ntp
and
set date
commands, refer to the previous
section,
Configuring Network Settings
.
