Cisco AT&T U-verse ISB7005, Руководство по установке

Страница: 14 / 32

14
Connections for a Standard-Defi nition TV (SDTV)
When using the receiver with an SDTV, you must make one of the following connections to view
content. Some SDTVs may not have all these connections. Refer to the owner’s manual for your TV
and the cabling diagrams in this manual for more detailed information.
Although all connections provide you with quality service, we list the connections in our
recommended order.
Notes:
• The labeling on your receiver or SDTV may vary slightly from the illustrations shown below.
• Some cables shown in the connection diagrams may not be included with this receiver.
The YPbPr (red, blue, and green) connectors
can provide standard-defi nition component
video signals to an SDTV. A separate audio
connection is also needed.
See the connection diagram on page 19 for an
example.
SDTV
Connections
Use One of These Required
Connections to an SDTV
Receiver
Connections
The S-Video connection provides an optimal
video connection to SDTVs. A separate audio
connection is also needed.
See the connection diagram on page 20 for
an example.
Audio/Video
The Video Out connector provides a video
connection to an SDTV. A separate audio
connection is also needed.
See the connection diagram on page 21 for
an example.
S-
Video
T
o
TV (Video Out)
Video Out
TO TV
(VIDEO OUT)
CABLE IN/
ANT IN
S-VIDEO
IN
VIDEO
OUT
VIDEO
IN
L R
L R
Pr
Pb
Y
L R
YPbPr
Audio
Video
Audio
Video
The To TV (Video Out) connector provides both
a video and audio connection to an SDTV.
See the connection diagram on page 22 for
an example.
Audio
Video
Pr
Pb Y
AUDIO
OUT
L R
AUDIO
OUT
L R
AUDIO
OUT
L R
S-VIDEO