Cisco AT&T U-verse ISB7005, Руководство по установке

Страница: 10 / 32

10
Because the connections
for a high-defi nition (HD)
or standard-defi nition (SD)
TV are diff erent, you must
determine if your TV is HD
or SD. Your TV must
receive HD signals for
you to enjoy the benefi ts
of HDTV. Refer to the manual that came with your TV for more information.
See page 27 for more information on picture formats.
Connecting the Receiver
To connect your receiver to your network and home entertainment devices, complete these steps.
Identify the additional consumer
electronic devices you will
connect to the receiver and TV.
See pages 16 through 24 and
refer to the owner’s manual for
the device.
Plug the receiver and the TV into an AC power source that is not controlled by a
switch. For further instructions on completing your setup, refer to the
Feature
Guide available from your service provider.
Make the connections for your TV, VCR, and DVD recorder as follows:
• If you are using an HDTV, see page 13 and the connection diagrams in this
manual.
• If you are using a standard-defi nition TV, see page 14 and the connection
diagrams in this manual.
• If you want to record some programs on VCR tape or DVD, see page 15
and the connection diagrams in this manual.
1
2
4
3

Home Theater
Other DVD VCR
9
16 4
3 or