manualshive.com logo in svg

Cisco ASR-920-24SZ-IM, Руководство по установке оборудования

Cisco ASR-920-24SZ-IM - это мощное устройство для сетевой инфраструктуры. Вы можете загрузить бесплатное Руководство по установке оборудования на нашем сайте. Сосредотачивайтесь на функциях и возможностях этого продукта, а не на процессе загрузки. Получите руководство на manualshive.com.

Поделиться
Скачать
background image

All rights reserved.

Certain components of Cisco IOS-XE software are

licensed under the GNU General Public License ("GPL") Version 2.0.

The

software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.

You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0.

For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
% failed to initialize nvram
% attempting to recover from backup
% failed to initialize backup nvram

Tmpdisk creation successful, status = 0

flashfs[17]: 0 files, 1 directories
flashfs[17]: 0 orphaned files, 0 orphaned directories
flashfs[17]: Total bytes: 1935360
flashfs[17]: Bytes used: 1024
flashfs[17]: Bytes available: 1934336
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco ASR1000 (Freescale P2020) processor (revision 1.2 GHz) with 916936K/6147K bytes of memory.
Processor board ID CAT1814V0H6
24 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3670016K bytes of physical memory.
1328927K bytes of SD flash at bootflash:.
3932032K bytes of USB flash at usb0:.

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
*Sep 25 23:30:01.541: TRACE - Smart Agent successfully registered as a RF client
*Sep 25 23:30:01.541: TRACE - Smart Agent registered as a CF client succeeded
*Sep 25 23:30:01.541: TRACE - Smart Agent set CF bundle mode succeeded
*Sep 25 23:30:03.678: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = ASR-920-24TZ-M
Next reboot level = metroaccess and License = No valid license found
*Sep 25 23:30:09.212: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM contents failed
*Sep 25 23:30:12.458: %IOSXE_RP_NV-3-BACKUP_NV_ACCESS_FAIL: Initial read of backup NVRAM contents
failed
*Sep 25 23:30:13.941: TRACE - Smart Agent receives a RF status event 408
*Sep 25 23:30:13.941: TRACE - RF status event: unsupported status event: 408
*Sep 25 23:30:16.911: TRACE - Smart Agent receives a RF progression state event 100 0
*Sep 25 23:30:16.911: TRACE - RF progression state: state prog initialization
*Sep 25 23:30:16.921: TRACE - Smart Agent receives a RF progression state event 200 0
*Sep 25 23:30:16.921: TRACE - RF progression state: Active starts progression
*Sep 25 23:30:16.922: TRACE - Registry smart_agent_pf_get_sys_data Not used
*Sep 25 23:30:16.922: TRACE - Get Sys Data from PI The requested operation is not supported
*Sep 25 23:30:16.922: TRACE - UDI Retrieval returned Success
*Sep 25 23:30:16.922: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Sep 25 23:30:16.923: %SMART_LIC-6-HA_ROLE_CHANGED: Smart Agent HA role changed to Active.
*Sep 25 23:30:16.928: TRACE - Smart Agent receives a RF progression state event 201 0
*Sep 25 23:30:16.928: TRACE - RF progression state: Active drain
*Sep 25 23:30:16.931: TRACE - Smart Agent receives a RF progression state event 202 0
*Sep 25 23:30:16.931: TRACE - RF progression state: Active preconfig
*Sep 25 23:30:16.936: TRACE - Smart Agent receives a RF progression state event 203 0
*Sep 25 23:30:16.936: TRACE - RF progression state: Active postconfig
*Sep 25 23:30:16.939: TRACE - Smart Agent receives a RF progression state event 204 0
*Sep 25 23:30:16.939: TRACE - RF progression state: Agent is now fully Active 0
*Sep 25 23:30:17.662: pak_debug_init: Successfully initialized pak debug trace buffer
*Sep 25 23:30:17.789: ********************

Box changed from Router mode to Router mode

*Sep 25 23:30:18.114: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlanCannot Get the

number of ports in MAC notification

Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation

Guide    

119

Initial Configuration

Powering Up the Router

Содержание ASR-920-24SZ-IM























































































































































Отзывы:

Нет отзывов

Похожие инструкции для ASR-920-24SZ-IM

D-Link DSL-2750U Quick Start Manual preview
DSL-2750U
Бренд: D-Link Страницы: 2
D-Link DIR-862L Manual preview
DIR-862L
Бренд: D-Link Страницы: 4
D-Link DIR-860L Quick Install Manual preview
DIR-860L
Бренд: D-Link Страницы: 2
D-Link DIR-850L Resetting Manual preview
DIR-850L
Бренд: D-Link Страницы: 9
D-Link DIR-850L Setup And Installation Manual preview
DIR-850L
Бренд: D-Link Страницы: 8
D-Link DIR-865L Specifications preview
DIR-865L
Бренд: D-Link Страницы: 3
D-Link DIR-867 Quick Install Manual preview
DIR-867
Бренд: D-Link Страницы: 28
D-Link DIR-X1530 Quick Start Manual preview
DIR-X1530
Бренд: D-Link Страницы: 2
D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Quick Install Manual preview
DSL-2540B - ADSL2/2+ Modem With EN Router
Бренд: D-Link Страницы: 12
D-Link DIR-882 Quick Installation Manual preview
DIR-882
Бренд: D-Link Страницы: 62
JCG Q8 Quick Start Manual preview
Q8
Бренд: JCG Страницы: 2
i-MO 540 Series Product Installation Manual preview
540 Series
Бренд: i-MO Страницы: 58
NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL Router Specifications preview
DG834GT - 108 Mbps Super G Wireless ADSL Router
Бренд: NETGEAR Страницы: 2
NC-link NC-AP111 User Manual preview
NC-AP111
Бренд: NC-link Страницы: 20
ANTAIRA LMP-1202G-SFP Series Hardware Manual preview
LMP-1202G-SFP Series
Бренд: ANTAIRA Страницы: 19
Alarm NX-208E Installation Manual preview
NX-208E
Бренд: Alarm Страницы: 5
Genexis FiberTwist G6426 Installation Manual preview
FiberTwist G6426
Бренд: Genexis Страницы: 9
Idis DR-1204P Installation Manual preview
DR-1204P
Бренд: Idis Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды