Cisco ASR 5000, Руководство администратора, Страница: 125 / 466

You must refine this command to specify particular sections of the configuration. Add the section keyword
and choose a section from the help menu as shown in the examples below.
show configuration errors section ggsn-service
or
show configuration errors section aaa-config
If the configuration contains no errors, an output similar to the following is displayed:
##############################################################################
Displaying Global
AAA-configuration errors
##############################################################################
Total 0 error(s) in this section !
Synchronizing File Systems
Whenever changes are made to a configuration or StarOS version boot order in a system with redundant
management cards, the file systems must be synchronized across the management cards. This assures that the
changes are identically maintained across the management cards.
Enter the following Exec mode command to synchronize the local file systems:
[local]host_name#
filesystem synchronize all
The filesystem command supports multiple keywords that allow you to check for and repair file system
corruption, as well as synchronize a file system with a specific storage device. For additional information,
see the
Exec Mode Commands chapter in the Command Line Interface Reference .
Saving the Configuration
These instructions assume that you are at the root prompt for the Exec mode:
[local]
host_name
#
To save your current configuration, enter the following command:
save configuration url [ obsolete-encryption | showsecrets | verbose ] [ -redundant ] [ -noconfirm ]
url specifies the location in which to store the configuration file. It may refer to a local or a remote file.
The
obsolete-encryption
and
showsecrets
keywords have been removed from the
save configuration
command in StarOS 19.2 and higher. If you run a script or configuration that contains the removed keyword,
a warning message is generated.
Important
For complete information about the above command, see the Exec Mode Commands chapter of the Command
Line Interface Reference .
Do not use the "/" (forward slash), ":" (colon) or "@" (at sign) characters when entering a string for the
following URL fields: directory, filename, username, password, host or port#.
Important
ASR 5000 System Administration Guide, StarOS Release 21.1
97
Verifying and Saving Your Configuration
Synchronizing File Systems