manualshive.com logo in svg

Cisco ASR-1000-SIP10, Руководство по установке оборудования, Страница: 8 / 102

Поделиться
Скачать
Cisco ASR-1000-SIP10 Скачать руководство пользователя страница 8

viii

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide

OL-14126-03

Preface

  

Organization

This document contains the following chapters:

Related Documentation

The documentation listed below is available online and on the Documentation DVD.

Your router, switch, or gateway and the Cisco IOS software running on it contain extensive features, 
which are documented in the following resources: 

  •

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide

  •

Cisco IOS software:

  –

For Cisco IOS configuration information and support, refer to the configuration guide or 
command reference for a Cisco IOS mainline release. You can also refer to the specific Cisco 
IOS software document for a particular feature.

  –

To see if a feature is supported by a Cisco IOS release, to locate the software document for that 
feature, or to check the minimum software requirements of Cisco IOS software with the 
hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com. 
You must be a registered user on Cisco.com to access this tool. To access Software Advisor, 
click 

Login 

at Cisco.com, type “Software Advisor” in the SEARCH box, and click 

GO

. Click 

the link for the Software Advisor tool.

Section

Title

Description

Chapter 

1

SIP and SPA Product Overview

Provides an introduction to SPA interface 
processors (SIPs) and shared port adapters 
(SPAs).

Chapter 

2

Overview: Cisco ASR 1000 Series 
Aggregation Services Routers SIPs

Provides a SIP and SPA compatibility summary. 
For each supported SIP, provides a summary of 
SIP characteristics and a SIP overview.

Chapter 

3

Overview: Cisco ASR 1000 Series 
Aggregation Services Routers 
Shared Port Adapters

For each supported SPA, provides a summary of 
SPA characteristics and a SPA overview.

Chapter 

4

Preparing to Install a SIP or a Shared 
Port Adapter

Describes the required tools, equipment, and 
safety guidelines for installing SIPs and SPAs.

Chapter 

5

Installing and Removing a SIP

Describes the procedures for installing and 
removing a SIP on Cisco ASR 1000 Series  
Aggregation Services Routers.

Chapter 

6

Installing and Removing a Shared 
Port Adapter

Describes the procedures for installing and 
removing a SPA on Cisco ASR 1000 Series  
Aggregation Services Routers. It also describes 
how to verify the SIP and SPA installation.

Chapter 

7

Troubleshooting the Installation

Provides information for troubleshooting the 
installation of SIPs and SPAs. It also provides 
packing information to ship a SIP or SPA.

Содержание ASR-1000-SIP10







































































































Отзывы:

Нет отзывов