C H A P T E R
1-1
Cisco Aironet 1810 Series OfficeExtend Access Point User Guide
1
Installing and Configuring the Access Point
This chapter provides the following information:
•
Before You Begin, page 1-1
•
Installing the Access Point in the Network, page 1-2
•
Configuring the Wireless LAN Controller IP Address on the Access Point, page 1-3
•
Configuring Radio Channels on the Access Point, page 1-4
•
Configuring Personal Wireless LANs, page 1-4
•
Troubleshooting, page 1-5
Before You Begin
The following sections provide information on how to install and configure the Cisco Aironet 1810
Series OfficeExtend Access Point. The specifications of the access point (AP), the parts, mounting
options, powering options and other hardware installation procedures are provided in the
Getting Started
Guide - Cisco Aironet 1810 Series OfficeExtend Access Points
, at:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1810/quick/guide/oeap1810getstart.html
Ensure that the AP is properly mounted and ready to be powered up before proceeding with the sections
that follow. This document is meant to be used in conjunction with the following guides:
•
Getting Started Guide - Cisco Aironet 1810 Series OfficeExtend Access Points
, at:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1810/quick/guide/oeap1810getstart.html
•
Cisco Aironet 1810 Series OfficeExtend Access Points Deployment Guide,
at:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_Cisco_OfficeExtend_Access
_Point_.html
